PNEUMATIC Vacuum station
VS5

For resin infusion process and RTM/RTM-light. Ideal for the industrial manufactories with central compressed airline. An ejector is used to create a vacuum. For operation, the station must be connected only to compressed air, with a pressure of 5 to 10 atm. VS5-P can be used as vacuum traps and degassers. The ejector does not require maintenance, oil filling and repair unlike vacuum pumps, and also has a low cost and is completely fire-explosion safe.

ON STOCK
WORLDWIDE DELIVERY
REQUEST
specification
  • VS5 has pneumatic control system. Does not require connection to electric system. Fire-explosion is safe.
  • Quick-change connections for 8, 10 and 12 mm diameter vacuum tubes with plugs.
  • Convenient attachment of cap - on magnets, facilitates and accelerates removal and installation of the cap.
  • Two entries for trap - one with a ball valve, the second valve for smooth discharge and vacuum depth adjustment.
  • Strong construction of a steel trap with high-quality powder painting.
  • Vacuum ejectors can create a vacuum with a depth of up to 90%, are convenient and easily controlled in the entire pressure range.
  • Do not require maintenance, lubrication, do not contain movable parts, the noise level is low.
Technical specification
VACUUM STATION VS5
_
_
Connections for vacuum tube, pieces
3
Flow rate, m3/h
15
Resin trap volume, liter
5
Compressed air consumption, m3/h
24